Tips To Help Make Concrete Cutting Easier
If you have an upcoming project that will require you to conduct some concrete cutting, you will want to do all that you can in order to prepare for this. By learning as many tips as you can, you should find that the process will be much easier for you. Here are some tips to help get you started:
Gather Up The Best Tools
It is essential to make sure that you are going to have all of the right tools for the job. This may include gathering a hammer drill, circular saw, electric breaker, sledge hammer, and a jack hammer. You might not need all of those tools, depending on how thick the concrete is and how easily it ends up breaking apart, but it is a good idea to have them all on hand. The more tools you have nearby in the event that they are needed, the less aggravating it will be should you need to stop and get a different tool to get the job done.
Use The Proper Protective Gear
Not only will using the proper protective gear lessen your chances of becoming injured, but it can actually help ensure that you will have an easier time with the completion of breaking up the concrete. For example, thick work gloves will help prevent sores from developing on your hands, which would surely slow you down or cause you to have to stop working early if they are too bad. You will also want to make sure that you are wearing steel toe boots to protect your toes and protective eye wear as well.
Start With A Small Surface Cut
This can be marked with chalk and then cut along the path with a circular saw. Make sure that you are using a proper blade that is meant for cutting concrete. After you have gone through and made your small surface cut, you can then use your other tools to break through the rest of the concrete with ease. You could skip this step, but you might find that it is going to take a lot more force on your part with the other tools in order to get through the concrete. It is best to give yourself a head start with the circular saw and it will only take a little bit of time.
Contact a company, like KC Coring & Cutting, for more help with your project.
Share